So, after much procrastination, I finally got down to checking the fan blower motor.
Accessing the blower motor is relatively easy. You'll have to remove the glove compartment first. The blower motor is situated towards the top part of the dashboard.
Un-clip the wire from the blower motor. Then get a good grip on the blower motor and turn it clockwise to unlock it from its position. Then pull it out. Please Note the position of the blower motor when you pull it out, because it has to go in the same way. Otherwise you'll find it a bit hard to place back the blower motor
Upon removing the blower motor, I found it filled with dust, just as I have suspected.
The design of the motor is such that it sucks in air. I guess this is to keep the blower motor cool? How ever this causes a lot of dust built up in the motor itself.
I took out my air-gun and cleaned the insided of the motor and also the blower. Could not believe the amount of dust. To clean the blades real good, I decided to jet it with water. Carefully covered the motor with plastic
Once everything was cleaned, fixing back was a breeze. The blower motor works fine now. No more noise and lots of money saved :-)
No comments:
Post a Comment