Glove Box Light

You know the saying, “The spirit is willing but the flesh is weak”. Well, after months of wanting to do it, today I finally got down to actually doing it. Fixing my glove box light.

Items that you’d need :-

1.       Glove box light.

2.       Switch

3.       Wires.
 

[Update 5/10/2012]

I found the correct wiring for the glove box light. It a yellow connector located under the carpet behind the airbag/pre-tensioner ecu.

 So I rewired the lighting using this connector.
 

Removed the glove box. I also removed to front facia to make it easier to wire – up the light. Wiring was quite simple. For the power (+ve) I tapped from the cigarette lighter. And grounded it to the metal piece which holds the dashboard.

+ve taken from the grey colored wire.

Had to cut a bit to fit my light.

All in Place. Time to fix back everything.

Working Perfectly!!

Living At Pajam

Sorry Guys, this time, this post is not about my baby lion.

Most probably you found this page because you were looking for more information on the little town of Pajam, planning to shift here or settle down?

I’ve been living here for almost 2 years now. Overall, this is a nice quiet town to live in. But  I wished there was info online or someone to speak to  3 years ago to help me decide on my house purchase here.

Here I list a few important factors you should know before deciding on your purchase.

1.       The IBS system used to build the house does give excellent finishing. Nevertheless it has lots of drawbacks too. Many houses in my phase have walls which are not straight (dinding senget). In my house, a few walls are not straight. It’s quite hard to notice, but when you try to fix wall cabinets, picture frames, then you will definitely notice how crooked the walls are.

2.      I have had 2 doors frames changed because they were also crooked, which cause the doors not to close properly. From what I gathered from talking to the workers, most houses have this problem because the developer rushed to build these houses. Walls which are not straight is normal. I received my house keys about 3 months ahead of schedule. 

3.      These walls are not flexible; hence after a month or two, it starts to crack. Although the developer repairs the crack every time a complaint is made, sadly, these repairs does not last long. And if the cracks are bad, water seeps thru whenever it rains. So for the past 2 years, I’ve been having never ending wall cracks and leaks.

    This Crack appears on every single house here, its the wall where houses join each other.

This is my neighbour's house, end lot.

4.       House break-ins are very rampant in Pajam.  Houses which are not in a guarded and gated community has had many break-ins. Google “pecah rumah pajam” and you’ll understand. 

5.       If you have school going children, there are only 2 schools in Pajam, Sekolah Jenis Kebangsaan (T) Tun Sambanthan, and Sekolah Jenis Kebangsaan (C) Kampong Baru Pajam. I’m not sure if there are any plans to build any new schools around here. You’ll have to look at either Nilai or Mantin for alternatives.

6.       There’s a rubbish dump(tempat pelupusan sampah) at Pajam town. 3 years ago when I decided to buy a house here, the developer assured me that this rubbish dump would be closed down soon. Now 3 years later and it is still there.  To locate it, drive pass Pajam town, heading towards Mantin. You’ll come to College Heights. Landmark is some white colour shop houses on the left. To the right you’ll see a row of old single storey shops. The rubbish dump is located behind these shops.  Almost every other night, there will be a horrible stench in the air. It is much worse when it rains. It’s so bad that when the smell comes I would have to run and close all my doors and windows. Sometimes the smell would come in the middle of the night, waking me up from my sleep. This problem is very bad and its solution does not seem near. I had no choice but to aircond the whole house so that we would be able to get a good night’s sleep without waking up in the middle of the night to this horrible smell. Part of the rubbish dump has been covered and converted to harvest biogas. I still have no idea when this rubbish dump will be closed for good, because for now there are still rubbish trucks dumping there.  Google “pencemaran udara Pajam” & “bau busuk Pajam”  for more info.

         Mobile phone coverage is poor in this area.  Forget about using mobile broadband in the house.  Because of the concrete structure used to build the house, Mobile signal is very poor in at the ground floor. Around the dining area onwards, there’s no mobile coverage in the house. This forced me to get a fixed line for safety reasons. Mobile coverage at the first floor is ok.

 

8.       KL is situated roughly 40kms away. Toll will cost you RM2.80(Pajam-Kajang), RM0.90(Bt.11 toll) and RM1(Bt.9 toll). On average, including jam, it will take 1 – ½ hours in the morning to get to KL (golden triangle area). Getting home from KL will take about 1hour or less by using Jalan Loke Yew to get back. Without Jam, it will take 30 – 45mins to get to KL, depending how fast you travel. Travelling to Putrajaya/Cyberjaya will take roughly the same time, toll free, driving thru Nilai à Dengkil à CyberjayaàPutrajaya.

9.       If you wish to commute by train, either use the KTM Kommuter @ Batang Benar station or the ERL @ Salak Tinggi. The Batang Benar station is about 5minutes from Pajam and the Salak Tinggi Station is about 15 – 20 minutes away.

This is the residence community portal. http://www.pchrs.com. I Hope this information has help you with your decision. All the best

Water In Air Filter Assembly

Problem : Water in the Air Resonator and Air Intake
Symptom : Engine dies off while driving. Difficult to restart engine. Lots of white smoke from exhaust pipe once car is restarted.
Cause : Broken Clip on the Air Resonator
Duration of Repair : 2 Hours

I think the clip broke after I drove over a speed bump and the bottom of the car hit it. Even though I went over it slowly, I guess it damaged the air resonator clip.

 

When the clip broke, the air resonator tilted causing it to dislodge from the air intake pipe. Lots of water got into my air filter. It was dripping wet when I took it out. Here you can see the amount of water in the air filter hose 

Even the original sealant that was used to seal the air resonator together was leaking. My mechanic took out the whole air filter assembly. He modified the clip and resealed the whole assembly using silicone glue.

Here's the clip that broke. After fixing the clip, Hassan (my ultra cool mechanic) tested the sealant of the resonator by using pressurized air blown into the air resonator. Residue water left in the resonator was coming out thru the sealant.

That's when Hassan decided to seal up the whole assemble with silicone. All done and drying under the sun.

 

All fixed and good to go.

 Here is where it got dislodged

After testing the car for 3 days, driving in the rain, All is good. If you've driven over a curb or speed hump and the LEFT FRONT ( PASSENGER SIDE ) has hit the road, I would strongly advise you to have your air filter assembly checked.

Driving Thru A Flooded Area

IMPORTANT : As mush as possible, please try not to drive thru a flooded area. You won’t be able to gauge how deep the water is from sitting inside your car. This is only a rough guide if you find yourself suddenly in deep waters.
Its now the monsoon season again. With the many road works going around in KL flash floods are bound to happen. And you might find yourself cought unexpectedly on a road which is flooded. This is what I do whenever I find myself in this type of situation.
1. Don’t Panic.
2. Look at the road curb, road divider, lamp post or any other objects which would be able to give u a rough idea of how high the water is. If you don’t feel confident, do not proceed.
3. Shift the car into 1st gear( tip- tronic mode if you’re driving an auto)
4. Say a short prayer.
5. If there's a vehicle infront of you, let it clear the flood too. You wouldn't want to end up behind him if his car stalls
6. Go into the flood slowly, to create a bow wave. For the 206 its about 15km/h to 20km/h.
7. Sit up right and you should be able to see the bow wave in-front of the car.
8. Adjust your vehicle speed accordingly so that you do not overtake the bow wave. Don’t let the bow wave get away from you either. 
9. Once you’ve cleared the flood, don’t forget to thank God and smile. IF your car stalls in the flood, my sympathy is with you.

 

These 2 pictures  are examples of a bow wave. As you can see, the water level infront of the vehicle/ the water level of the bow wave  is much higher compared with the water level behind the bow wave. Imagine you’re in a bathtub. Then push  your palm across the water. You’ll notice that the water level in-front of your palm is higher than the water level at the back of your palm. The same concept applies here. When you drive into the flood slowly, you’re using the car’s front bumper to create the bow wave. It pushes the water away, thus lowering the water level from the engine bay onwards.

Sterring Wheel Logo Replacement

The mother of all conversions. Removing the Ugly round Naza logo from the steering wheel. I always wondered why warranty would be void if the logo is removed and now i think i know why...look closely at the photo below. This is how the steering wheel looks like with the logo removed.



As you can see, the air bag is exposed once the logo is removed.I believe that Nasim/ Peugeot are afraid that once we remove the logo and with the air bag exposed, we might do something that will cause the air bag to malfunction.  Hence I'm sure Nasim/Peugeot would not want to bear any responsibility.

So, I would advice not to remove the logo unless you really know what you are doing. Otherwise be willing to spend and do a proper conversion by changing the whole driver airbag which comes with the peugeot logo.




But if you still insists on doing it, here's how to do it. Get an Engine Emblem. The Lion logo is taken out from this emblem.

The back part of the eblem looks like this

 

Remove the double sided tape and the press the lion out



Next its time to remove the Naze Logo from the steering wheel. Remove the horn fuse, so that the horn does not sound when you pull out the logo. Try using your hands to pull out the logo. Try avoid using any tools because the streering/airbag cover is very soft and is easily scratched. You'll have to pull really hard because you need to break the 2 plastic rivets which holds the naza logo in place(look at the picture above). Once its out you can then place the lion logo.

 

You may file down the rear of the lion according to the thickness you prefer. Don't forget to fix back the horn fuse. good luck!! :-)