You know the saying, “The spirit is willing but the flesh is weak”. Well, after months of wanting to do it, today I finally got down to actually doing it. Fixing my glove box light.
Items that you’d need :-
1. Glove box light.
2. Switch
3. Wires.
[Update 5/10/2012]
I found the correct wiring for the glove box light. It a yellow connector located under the carpet behind the airbag/pre-tensioner ecu.
So I rewired the lighting using this connector.
I found the correct wiring for the glove box light. It a yellow connector located under the carpet behind the airbag/pre-tensioner ecu.
So I rewired the lighting using this connector.
Removed the glove box. I also removed to front facia to make it easier to wire – up the light. Wiring was quite simple. For the power (+ve) I tapped from the cigarette lighter. And grounded it to the metal piece which holds the dashboard.
 |
| +ve taken from the grey colored wire. |
 | |||
| Had to cut a bit to fit my light. |
 | ||
| All in Place. Time to fix back everything. |
 |
| Working Perfectly!! |
